PCI-EK01 Users Manual (Rev 1.0)
-
26-
http://www.daqsystem.com
13
I/O Write
Data
It set up writing data in I/O.
16bit
Hexa-Decimal
14
I/O Auto
Increment
It set up automatically increase I/O address in case of
reading or writing several I/O data.
Not apply Currently
15
DAC FIFO
Write
Points
It set up how many point unit write to DAC FIFO for
Waveform Generation.
It is the point from 1 to maximum 1000.
16
DAC FIFO
Write
It is writing the data above points at FIFO.
* Writing data is a Sine wave.
17
I/O Read
Data
It marks a data which read it to specific address in I/O.
18
ADC
Run/Stop
When press button, it reads value of ADC at buffer
periodically (0.5 sec) and will run or stop at screen.
19
ADC
Channel
Enable
The ADC value can mark a lot of channels at screen, it
set up the channel which it wants to display.
It marks 4 channels at program.
20
Time Knob
It set up an axis of time if it marks ADC value to a
screen.
Not apply Currently
21
Voltage
Knob
It set up an axis of voltage if it marks ADC value to a
screen.
Not apply Currently
22
ADC
Graph
It marks ADC data on the screen.
(Remark)
1. The PCITest program uses an ActiveX for making ADC Graph so that you shall install specific OCX in
order to perform it. (Refer to CDROM for registration way)
2. If it performs a program at Windows 2000, you shall a copy
“GDIPlus.dll” to execution folder or
Windows system folder. It is not necessary to copy a file
“GDIPlus.dll” at Windows XP because XP
have one.
3. If you want to compile of PCITest sample source, you shall install the OCX and Windows platform
SDK. You can download a SDK at Micro Soft web site.
4. This program test and compile with Visual C++ 6.0/Service Pack 5.
5. System Recommend
Pentium 3 over or compatible PC (Pentium 2 is possible)
RAM 256M over (RAM 64M is possible)
Monitor 1024 x 768 over
Hard Disk 10G over
