USB3-FRM22 User’s Manual
25
3.5 Description of Misc. Functions
Various types of conditions can be selected and used.
“+5V Power” :
Outputs VIO power.
”I/O Power” :
Turns on/off the power of external signals used for MIPI.
“Sensor I2C Off” :
Sensor I2C operation On/Off.
“Sensor Reset” :
Set the Reset output of the sensor to High or Low.
“Sensor Enable” :
Set the Enable output of the sensor to High or Low..
”MCLK Off” :
Turns the master clock output On/Off.
“EPROM I2C” :
Change the address of USB3 EPROM to avoid collision with sensor I2C.
“PWR I2C” :
Turns I2C output of Power board On/Off. (To be added later)
(1)
“FAN Speed”
FAN speed (0 ~ 255) can be controlled.
(2)
“OS SPI Send” button
: It sends data to SPI (Serial Peripheral Interface).
Send Bytes: Specifies the bytes to be transmitted.
Data0/Data1: Data to be transmitted
(3) “Clr” button
Initialize the log message screen below.
