USB-LT02 Users Manual (Rev 1.0)
-
7-
http://www.daqsystem.com
3.2 Installation Process
For USB-LT02 board installation to PC is as follows. There isn
’
t a Jumper to especially
to set up for board installation in case of USB boards as it is Plug & Play devices.
Also, there is no need to install of device driver because of HID (Human Interface Device)
connection in case of USB-LT02.
(
1) First, open the box and connect to PC through USB cable.
(2) The opposite side of USB cable connects to USB-LT02 board.
(3) If cable connection succeeds, LED light on for indication of board supply.
(4) It confirms a driver normally installation in the following ways.
Do the following steps to show up the
“
Device Manager
”
window.
[My Computer -> Properties -> Hardware -> Device Manager -> Human Interface
Devices ->
“
HID-compliant device
”
[Figure 3-1. “System Properties” window]
Summary of Contents for USB-LT02
Page 8: ...USB LT02 Users Manual Rev 1 0 8 http www daqsystem com Figure 3 2 System Properties window...
Page 9: ...USB LT02 Users Manual Rev 1 0 9 http www daqsystem com Figure 3 3 Device Manager Window...
Page 21: ...USB LT02 Users Manual Rev 1 0 21 http www daqsystem com Figure 4 9 When All Output Click...
