USB-LT02 Users Manual (Rev 1.0)
-
15-
http://www.daqsystem.com
4.3 Connector Pin-out
The board has two connectors. There are the USB-B connector for USB
communication, the PIN-OUT of DIP IC type connector for external I/O and power. And
there is several test points.
USB-B type is a connector for High speed USB connection. Figure 4-5 and Table 1
shows the connector and its pin description.
USB B type
Connector
1
2
3
4
[Figure 4-5. USB-B Connector(Front View)]
[Table 1. USB-B Connector]
No.
Name
Description
Remark
1
VCC
USB Power +5V
2
D-
USB Signal Minus(Negative)
3
D+
USB Signal Plus(Positive)
4
GND
USB Power GND
Summary of Contents for USB-LT02
Page 8: ...USB LT02 Users Manual Rev 1 0 8 http www daqsystem com Figure 3 2 System Properties window...
Page 9: ...USB LT02 Users Manual Rev 1 0 9 http www daqsystem com Figure 3 3 Device Manager Window...
Page 21: ...USB LT02 Users Manual Rev 1 0 21 http www daqsystem com Figure 4 9 When All Output Click...
