USB-LT02 Users Manual (Rev 1.0)
-
22-
http://www.daqsystem.com
5. Test
5.1 Input Test
This chapter is for test to learn how to operate a board and check the abnormality of a
board. The test performs it at the PC which a USB-LT02 board was installed as it use a
program of
“
sample1.exe
”
in an EXE folder of CDROM.
The execution file and source file of sample1 and sample2 is in App and App0 folder of
CDROM. The execution file use a test, a user modifies a necessary a sample source file
that provided it usable.
[Figure 5-1. Sample1.exe]
In the left LED is on at the above pictures, in the right LED is off. If an input of bit1 of
port6 is
“
1
’
, LED is on, on the contrary to this, LED is off.
In other words, If TP0 connect to VCC (+5V), LED is on. IF TP0 connect to GND, LED is
off. At this time, the bit1 of port6 is used to set up by input at the above programs.
Summary of Contents for USB-LT02
Page 8: ...USB LT02 Users Manual Rev 1 0 8 http www daqsystem com Figure 3 2 System Properties window...
Page 9: ...USB LT02 Users Manual Rev 1 0 9 http www daqsystem com Figure 3 3 Device Manager Window...
Page 21: ...USB LT02 Users Manual Rev 1 0 21 http www daqsystem com Figure 4 9 When All Output Click...
