HID Kit
Install Guide
HID bulbs may vary from kit to kit. In some
instances you may need to use a pair of
pliers to modify the clips: Take a pair of
pliers and gently pull on the clip’s loop. This
will allow for more slack in the clips and
allow you to securely fasten your bulb.
Warning:
This modification will NOT void your
Dapper Lighting product warranty.
Note:
Properly Seating and
Securing Bulbs
Once you have installed the bulb, pull the clips across
the bulb and secure them onto the locking tabs.
Remove Spade Adapters
After installing your HID bulbs into your new Dapper
Lighting projector housings, completely remove this
extra spade adapter from both sides.
It is attached to your bulbs / wiring, but will NOT be
used during installation. Discard or set aside.
(833)-DAPPER-1 / (833)-327-7371
www.dapperlighting.com
20
