10
Maintenance
The DAP Audio WCM-16 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
DAP Audio WCM-16
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, set the switch on the WCM-16 in OFF position.
2.
Check the batteries, etc.
3.
If all of the above appears to be O.K., Set the switch in ON position.
4.
If you are unable to determine the cause of the problem, do not open the WCM-16, as this may
damage the unit and the warranty will become void.
5.
Return the WCM-16 to your DAP Audio dealer.
Product Specification
RF Output:
Maximum 10mW
Display:
Channel
Controls:
Power On/Off, Mute, Gain, Channel select
Frequency response: 40-16.500 Hz
Battery:
2 x AA 1.5V (not included)
Length:
265mm
Diameter:
45mm
Weight:
0.22 Kg
Design and product specifications are subject to change without prior notice.
Summary of Contents for WCM-16
Page 12: ......
