DAPAudio WCM-16, Manual

Page: 8 / 12

7
Be aware that when you are using several WCM microphones at the same stage, that each channel
should be separated by at least 4 channels. When using 4 WCM microphones, you could use following
settings:
Changing the sensitivity of the microphone
1.
2.
1)
Unscrew the microphone head (1) .
2) Adjust the gain (5) trimmer with a small screwdriver.
Tips for achieving maximum performance.
 Make sure you can always see the receiver from the transmitter position.
 Keep the distance from transmitter to receiver as short as possible.
 Avoid placing the receiver near metal surfaces and obstructions.
 Replace battery as soon as low battery LED lights.

If Perform a walk-through before performance or presentation. If dead spots are found, adjust the
location of the receiver. If dead spots remain, mark the dead spots and avoid them.