9
UBR-180BT
Ordercode: D1258
24) Rec input vol:
Use this control to adjust the level of the
Aux in (26)
input. Make sure the red LED of the
Rec level
(8)
VU meter does not light and that the orange LED only lights up occasionally.
25) Line out:
Connect to the line input of the Mixer.
26) Aux in:
Connect an external device from which you want to record.
27) Bluetooth output:
Connect to the line input of the Mixer.
28)
AC Inlet with integrated fuse holder
:
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the power switch to operate the unit.
Note:
Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains.
Replace the fuse only with a fuse of same specification (T630mA).
34) Intro Button:
When this key is pressed, the UBR-108BT will play each track for 10 seconds.
38) Program Button:
Press the Stop button to stop playback. Now press the Program
button to enter program mode. See
Program Play
on page 12
for more info.
39) ID3 button:
This button toggles the ID3 (track info) on or off.
40) Random button:
Pressing this button toggles the random function on or off. When the random mode is activated all tracks
will be played back in random order.
44) A-B Button:
Allows you to set a loop. See Loop Play on page12.
45) Mute Button:
When this key is pressed, the UBR-108BT will mute the
Line Output (25)
.
46) Play 1 button:
Allows you to play the current track once.
Summary of Contents for ubr-180bt
Page 16: ...2015 DAP Audio...
