DAPAudio TM-47, User Manual

Page: 7 / 12

5
Power supply frontpanel
Fig. 2
4. Output 3-pole XLR male connector.
5. Mic Input 7-pole XLR female connector.
Use the special 7-pole XLR cable supplied with your TM-47 to connect the microphone with the
Power supply.
6. Characteristic Switch.
You can use this switch to change the Microphone directional characteristic in 9 steps from Omni, via
Cardioid to Bidirectional.
Power supply backpanel
Fig. 2
7. 230/115V switch.
Always make sure that the power supply matches the product specification voltage. Do not attempt
to operate a 120V specification product on 230V power, or vice versa.
8. IEC Power Inlet.
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the power switch (9) to operate
the unit.
9. Power Switch.
This is the main Power switch. Press to turn the power supply on.