DAPAudio PM-Six, Manual, Page: 9 / 12

8
Ordercode: D6182
PM-Six
Set Up and Operation
Paging Function
01) Press one of the zone buttons 1-6 (05) or the ALL button to select the desired zone(s), at maximum
volume level. If you use multiple amplifiers, the ALL button will not function.
02) Press the TALK button and start talking. Once you have finished, press the TALK button again, to stop.
03) If you press the TALK button and do not say anything for 15 seconds, the device will deactivate.
04) In Paging mode, the Aux IN and the microphone sensitivity control will be transmitted to the selected
zone(s).
Message Bank
01) Press one of the message buttons (02) to select the desired message.
02) Press one of the zone buttons 1-6 (05) or the ALL button to select the desired zone(s), at maximum
volume level. If you use multiple amplifiers, the ALL button will not function.
03) Press the Repeat/Stop button (continuous playback) or Start/Stop button (single playback) to
activate/deactivate playback.
Updating Chime
01) Set the switch (07) to CHI position.
02) Connect your PC to the PM-Six, by means of a USB cable.
03) You will now see a new removable disk in Computer section of your PC.
04) Enter the removable disk and overwrite Chime.mp3 file with the new one.
Connecting the PM-Six to the ZPA-6240TU 100V Amplifier
Fig. 04