background image

 

  

 

 

   

 

Ordercode: D3901 

Odin S-18A Line Array Sub 

Set Up and Operation

 

Follow the directions below, as they pertain to your preferred operation mode. 
Before plugging the unit in, always make sure that the power supply matches the product specification 
voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa. 
 

Preset Selector 

01)

 

Turn the preset selector (07) to choose one of the 10 presets. See below for more information. 

 

Presets 

The below presets can be selected according to the preferences of the end user. Each preset consists of 
a set of properties, unique for every purpose and location. The presets differ by the EQ, Gain and Delay 
settings. 
 

PRESET 

NAME 

DESCRIPTION 

Default 

Preset for multipurpose use, set at a level of 0 dB 

Default Phase 180° 

Inverted 

Preset (Phase 180° Inverted) for multipurpose use, set at a level of 
0 dB. 

Low Sub 

Preset for live use (Bands/Performances), crosspoint at 105 Hz, set 
at a level of 0 dB. 

Low Sub Phase 180° 

Inverted 

Preset for live use (Bands/Performances) Phase 180° Inverted, 
crosspoint at 105 Hz, set at a level of 0 dB. 

Entertainment 

Preset for entertainment use (DJ/Playback), crosspoint at 125 Hz, 
set at a level of 0 dB. 

Entertainment Phase 180° 

Inverted 

Preset for entertainment use (DJ/Playback) Phase 180° Inverted, 
crosspoint at 125 Hz, set at a level of 0 dB. 

Cardioid 

Use the in-phase preset (0) on the front side and the out-of-phase 
(polarity reverse) preset (6) on the rear. 

End Fire 

Delaying front subwoofer @1,6m between front-front (@freq 53 Hz) 

EMPTY 

 

ODIN Editor 

Default settings, configurable with the ODIN Editor. 

 
 

Connection Cables 

Take care of your cables, always holding them by the connectors and avoiding knots and twists when 
coiling them: This gives the advantage of increasing their life and reliability. 
Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, 
etc.) are caused entirely by using unsuitable or faulty cables. 
 
For these applications the unit provides XLR and CAT-5 connectors to easily interface with 
most professional audio devices. Follow the configuration examples below for your particular 
connection. 
 

 

 
 

 

Summary of Contents for Odin S-18A













Reviews: