14
32. PFL switch
Allows you to route the
Aux 1 return (54)
input to the PFL bus.
33. Aux 2 return
The signal of the (stereo)
Aux 2 return (55)
inputs is summed
together for a mono signal and is routed to the (internal) aux
bus. This control allows you to adjust the level of the internal
aux bus to the (mono)
aux send (60)
output.
Warning: If you use the aux 2 return (55) input in combination
with the aux send (60) output as an effect send return, make
sure this control is set to its minimum position (fully
counterclockwise) otherwise you will create a feedback
loop. If you’re using this as an effect return you have to adjust
the return level with the ST/sub (39) control.
34. PFL switch
Allows you to route the
aux 2 return (55)
inputs to the PFL bus.
35. Aux send
With this control
You can adjust the output level of the aux bus to the
aux send (60)
output.
36. Tape in/USB
This control allows you to control the level of the
tape in (62)
and/or
USB (67)
input in the main (ST) mix.
37. Aux 1 ST/sub
This control allows you to adjust the level of the (stereo) signal from the
aux 1 return (54)
inputs to either
the main (ST) bus or the sub bus, depending on the position of the
ST/sub (38)
button.
38. Aux 1 ST/sub Button
Allows you to route the signal from the aux 1 return input (controlled by the
ST/sub (37) control
) to either
the main (ST) or the sub bus.
39. Aux 2 ST/sub
This control allows you to adjust the level of the (stereo) signal from the
aux 2 return (55)
inputs to either
the main (ST) bus or the sub bus, depending on the position of the
ST/sub (40)
switch.
40. Aux 2 ST/sub button
Allows you to route the signal from the
aux 2 return (55)
inputs (controlled by the
ST/sub (37)
control) to
either the main (ST) or the sub bus.
41. EFX send control
With this control
You can adjust the level of the
EFX send (61)
output which is connected to the EFX bus.
42. Ctrl room/phones
This control allows you to adjust the volume of the
control room (57)
outputs and the
headphones (64)
outputs.
Depending on the type of headphones connected to the phones jack, the Powermix is capable of
producing very high output levels via the phones output. Therefore, make sure to turn the control all the
way down (minimum setting) before connecting the headphones.
Warning: Listening to loud sound pressure levels over a longer period of time leads to hearing damage!
Summary of Contents for GIG-12
Page 22: ...20 Appendix 1 GIG 12 Block Diagram...
Page 23: ......
