12
17. Channel ST
This button allows you to route the channel to the main bus.
18. Channel sub
This button allows you to route the channel to the sub bus.
19. Channel PFL
The Solo button (pre fade listening) is designed to select a
channel and listen to that channel on your control room or
phones output independent of the position of the
channel fader
(20)
.
20. Channel fader
The fader
controls the volume of a single channel. The channel
faders should be positioned within the range of -5dB to 0dB, leaving
you with sufficient room to allow precise matching of differences in
the channel’s level settings. The overall volume is set with the master
fader. Even though the channel faders offer an additional gain of
+10dB, it is better not to exceed the +5dB position.
Summary of Contents for GIG-12
Page 22: ...20 Appendix 1 GIG 12 Block Diagram...
Page 23: ......
