DAPAudio EDGE ED-1, User Manual

Page: 16 / 20

15
EDGE ED-1
Product code: D1485
Connecting to Power Supply
Attention
Incorrect handling of the AC power adapter may result in hazardous situations
This device is delivered with an AC power adapter. Incorrect handling of the AC power adapter may
result in hazardous situations.
Connect the device to the socket-outlet with the supplied AC power adapter. Use only the AC power
adapter delivered with the device.
Connect the supplied Schuko to IEC cable to the supplied AC power adapter.
Connect the AC cable to the 12–15 V DC power connector IN (06).
Connect the AC power adapter to the socket-outlet.
Notes:
● Make sure that the socket-outlet is easily accessible.
● Disconnect the AC power adapter from the socket-outlet when the device is not in use.
5. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The devices do not
function at all
No power to the device
● Make sure that the device is
connected to power supply
No sound
The antennas do not function
correctly ● Make sure that the antennas are
connected correctly to the device
The receivers do not function
correctly ● Make sure that the receivers are
connected correctly to the device
The transmitter is switched off or
does not function correctly
● Make sure that the transmitter is
switched on and the batteries are not
depleted
The transmitter is muted ● Make sure the transmitter is not muted
The volume is too low
● Turn up the volume on the receiver
● Make sure that the volume on the
connected devices is turned up
Channel selection
● Make sure that the receiver and the
transmitter are paired.
The transmitter is out of range
● Move the transmitter closer to the
receiver
Connections are defective
● Examine connections and cables.
Correct defective connections. Repair
or replace damaged cables
The connected mixer or amplifier
does not function correctly
● Make sure that the connected mixer or
amplifier is switched on and functions
correctly