10
EDGE ED-1
Product code: D1485
4.
Installation and Setup
Ambient Conditions
●
The device can be used only indoors.
●
The maximum ambient temperature t
a
= 50 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 50 °C.
Installation
The device can be put on a stable, flat surface, or can be mounted in a standard 19-inch rack. The
receiver requires 1 rack unit (U) of space, which is 44,45 mm high. Make sure that the rack is sufficiently
secured to prevent it from becoming unstable or falling over.
The device is supplied with 2 mounting brackets and mounting screws. It is possible to mount a single or
two devices in a 19-inch rack.
To mount the device, you need a Phillips screwdriver. To mount the device in a two-post rack, follow the
steps below:
Attach the mounting brackets and/or the mounting plate to the device(s). See 4.2.1. Single Device
or 4.2.2. Two Devices on pages 10–11 for more information.
Insert 4 cage nuts in the openings on the rack posts where you want to mount the antenna
distributor(s).
Position the antenna distributor(s) in front of the rack posts so that the 4 x mounting openings on the
mounting brackets face the openings on the rack posts with cage nuts.
Using a screwdriver, mount the antenna distributor(s) to the rack posts with 4 screws.
Single Device
Attach the supplied long mounting brackets with the mounting screws to the antenna distributor. Use a
Philips screwdriver to tighten the mounting screws.
Fig. 05
Summary of Contents for EDGE ED-1
Page 10: ...9 EDGE ED 1 Product code D1485 Dimensions Fig 04...
Page 19: ...18 EDGE ED 1 Product code D1485...
Page 20: ...2023 DAP...
