12
EDGE ED-1
Product code: D1485
Setup
It is possible to connect accessories to 1 or more antenna distributors, to provide better signal reception
for the connected receivers. See 3.4. Accessories on page 8 for more information.
To connect the antenna distributor to other devices, follow the steps below:
Connect other EDGE devices to the antenna distributor. See 3.4. Accessories on page 8 and 4.3.1.
Setup with Single Device or 4.3.2. Setup with Two Devices on pages 13–14 for more information.
Connect the antenna distributor to power supply. See 4.4. Connecting to Power Supply on page 15.
The device can be used for powering of the receiver(s) in the setup.
Make sure that the phantom power of the receiver (ANT DC) is activated. Refer to the user manual of the
receiver for more information.
Note:
ANT DC must be set:
●
to ON, if the receiver is powered by its own power adapter.
●
to ON, if the antenna distributor is connected to the receiver. The receiver will be powered by the
antenna distributor.
●
to OFF, if the antenna distributor and the power adapter of the receiver are both connected to the
receiver.
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
Summary of Contents for EDGE ED-1
Page 10: ...9 EDGE ED 1 Product code D1485 Dimensions Fig 04...
Page 19: ...18 EDGE ED 1 Product code D1485...
Page 20: ...2023 DAP...
