13
EDGE EBS-2
Product code: D1480B
4.
Installation and Setup
Ambient Conditions
●
The device can be used only indoors.
●
The maximum ambient temperature t
a
= 50 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 50 °C.
Installation
The receiver can be put on a stable, flat surface, or can be mounted in a standard 19-inch rack. The
receiver requires 1 rack unit (U) of space, which is 44,45 mm high. Make sure that the rack is sufficiently
secured to prevent it from becoming unstable or falling over.
The device is supplied with 2 mounting brackets and mounting screws. It is possible to mount a single or
two receivers in a 19-inch rack.
To mount the receiver, you need a Phillips screwdriver.
To mount the receiver in a two-post rack, follow the steps below:
Attach the mounting brackets and/or the mounting plate to the receiver(s). See 4.2.1. Single
Receiver or 4.2.2. Two Receivers on pages 13–14 for more information.
Insert 4 cage nuts in the openings on the rack posts where you want to mount the receiver(s).
Position the receiver(s) in front of the rack posts so that the 4 x mounting openings on the mounting
brackets face the openings on the rack posts with cage nuts.
Use a screwdriver to mount the receiver(s) to the rack posts with 4 screws.
Install the bodypack. See 4.2.3. Installation of the Bodypack on page 15 for more information.
Single Receiver
Attach the supplied long and short mounting brackets with the mounting screws to the receiver.
Use a Philips screwdriver to tighten the mounting screws.
Fig. 09
Summary of Contents for EDGE EBS-2 V2
Page 13: ...12 EDGE EBS 2 Product code D1480B Dimensions Fig 08...
Page 34: ...33 EDGE EBS 2 Product code D1480B...
Page 35: ...34 EDGE EBS 2 Product code D1480B...
Page 36: ...2023 DAP...
