15
Maintenance
The
DAP Audio-CD-Player DS-CM-12MP3
requires almost no maintenance. However, you should keep the
unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not
immerse in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the crossfader
1.
Unscrew the fader
(B)
screws.
Do not touch the innerscrews (C).
Carefully remove the old crossfader
and unplug the cable
(D)
.
2.
Plug in the new Crossfader
,
attach the cable
(D)
and place the new Crossfader back in the mixer.
3.
Screw the Crossfader into the mixer using the fader plate screws.
4.
Replace the fader knob.
Fig. 11
Troubleshooting
DAP Audio-CD-Player DS-CM-12MP3
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, unplug the device.
2.
Check power from the wall, all cables, connections, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If nothing happens after 30 seconds, unplug the device.
5.
Return the device to your DAP Audio dealer.
