DAPAudio DLM-26, Product Manual

Page: 7 / 33

5
Backside
12) IEC Con Fuse
13) RS232-SOCKET
14) MIDI OUT
15) MIDI THRU
16) MIDI IN
17) 6x XLR Output Socket
18) 2x XLR Input Socket
LED Input Barographs
The input barographs respond to –30dB input and also indicate digital clipping.
These show the input level: -30dB, -20dB, -12dB, -6dB, -3dB, LIMIT, OVER (=CLIP).
In addition, the CLIP lights function both as analog input clip indicators and to show if there is clipping in the
digital signal path. If both A & B CLIP LED’s flash, but the LED directly below the CLIP does not, this would
indicate that the DSP is clipping and not the analog input circuitry. This situation would most likely be
caused by excessive digital gain or EQ in one or more outputs.
LED Output Barographs
The Output barographs represent signal level relative to limiter threshold.
Jog-wheel
This jog-wheel changes all parameters. If this control is pressed, it will step through the input and output
modes (also see page 7). If held down and turned it will enable fast switching through the available modes.
Prev, Next, ,
The PREV/NEXT-buttons ( 8+9 ) enable you to scroll through the various screens and select a parameter you
want to adjust. If you want to adjust the value of the currently selected parameter, press / ( 5+6 ).
Where the parameter is non-numeric, these keys scroll through a list of options.