DAPAudio DLM-26, Product Manual

Page: 32 / 33

30
Product Specifications
Model: DAP Audio DLM-26
Power consumption: 30W
Dimensions : 483 x 223 x 44.5 mm (LxWxH)
Weight : 3.6 kg
Input Section
Inputs: 2 active, balanced
Input Impedance: 10 KOhm, electronically balanced
Maximum Input Level: +20 dBu, 600
or greater
Input Gain: +/- 15 dB, variable in 0.1 steps
CMRR: > 50 dB (30 Hz – 20 KHz)
Input Connector: XLR-3F (1=G, 2=+, 3=-)
Frequency response: 15Hz – 20KHz (+/- 0.25dB)
15Hz – 40KHz (+/- 3dB)
Input Gain Range: -40 dB – +6 dB ±0,5 dB
Output Section
Outputs: 6 active, balanced with automatic correction for unbalanced loading
Output Impedance: <50
, electronically balanced
Maximum Output Level: +20 dBu, 600 or greater
Output Gain Range: +/- 21 dB, variable in 0.1 steps
Output Connector; XLR-3M (1=G, 2=+, 3=-)
Crossover Filters
Slopes; 6, 12, 18, 24 or 48 dB per octave (Filter type dependant)
Type: Bessel, Butterworth or Linkwitz-Riley
Delays
Delay Step: 21 s
Max Delay time: 630 ms
EQ
Maximum number of EQ filters: 60 (depending on crossover slopes)
EQ Type: Parametric, Bell or shelving on any filter. 9 filters assigned to Dynamic EQ
EQ Gain: +/- 15 dB, variable in 0.5 dB steps
Q (bandwidth): 0.05 – 3 octaves, variable in 0.05 steps
EQ Frequency: 15 Hz – 20 KHz
Dynamic Slope: 2:1 – 20:1 (dynamic EQ’s only)
General Performance with filters out
Frequency Response: 15 Hz – 20 KHz, +/- 0.25 dB 15Hz – 40 KHz, +/- 3 dB
Dynamic range: >112 dB unweighted 22 Hz – 22 KHz, > 117 dB on AES/EBU input
Channel Separation: >80 dB, 30 Hz – 20 KHz
Distortion (THD): < 0.005%, 20 Hz – 20 KHz @ 10 dBu output
Input Metering: -20 dB, -12 dB, -6 dB, -3 dB, CLIP relative to Clip point (+20dBu)
Output Meter indication: SIG (-40dB), -20dB, -12 dB, -6 dB, -3 dB, 0 dB, OVER (+6dB)
relative to limiter threshold setting
Design and product specifications are subject to change without prior notice.