DAPAudio DCX-36 MKII, Manual

Page: 11 / 25

9
Software DCX
Installing the DCX software
Make sure the DCX-36 MKII is not connected to your computer.
Insert the CD in your computer. First you have to Install the Driver software by clicking on
DL2303_Profile_DriverInstaller_1025.EXE .
Next you have to install the DCX software by clicking on
DCXSetup_V13.EXE .
Now connect the DCX-36 MKII via a USB-cable to your computer.
Start up the DCX software by double Clicking the DCX icon on your desktop.
If you start up the DCX software for the first time, most likely you’ll get the message shown below.
In this case press the OK button. The program will start up. Your screen will look like the figure below.