DAPAudio D147079, User Manual

Page: 6 / 19

4
Description of the device
Features
The IEM-100 is a Wireless In Ear Monitor Set from Dap Audio.
• UHF-band PLL Synthesized design.
• Frequency agility over a 25MHz bandwith, with 48 pre-programmed frequencies avaiable.
• Built-in limiter circuitry eliminates distortion under excessive input levels.
• Front panel monitoring headphone jack
• Dual-antenna true diversity receiver, eliminating signal dropout and enhancing RF stability.
Overview
Fig. 1
1. Power switch
Turns transmitter on or off.
2. Headphone out jack
To connect a monitoring headphone.
3. Headphone volume control
Used to adjust the headphone volume level.
4. Limit indicator L
Lights if the incoming signal (Left/ channel 1)exceeds the limiting threshold.
5. Display
6. Limit indicator R
Lights if the incoming signal (Right/ channel 2)exceeds the limiting threshold.
7. Menu button
8. Up button
9. Set button
10. Down button
Fig. 2
11. Antenna
12. XLR balanced Audio Out connector
13. ¼” Phone jack audio Input connector (Unbalanced High Z).
14. Gain Switch
Used to set the input sensitivity.
15. Power input connector.
Please use the supplied AC adapter only.