DAPAudio D147079, User Manual

Page: 11 / 19

9
Squelch Setting: Press the SET button until SQL is flashing (Figure 11). Use the up / down button to
adjust the squelch setting.
Fig. 11
Equalizer Setting:
Press the
SET button until EQ is flashing (Figure 12). Use the Up or Down button to adjust the Audio
Balance.
Fig. 12
Note: If no button is pressed for 3 seconds, the system will automaticly exit the setting state and
save the current setting.
Receiver Battery Installation
Fig. 13
Press the battery compartment door Install the batteries.
And slide the cover in the direction
As shown in Figure 13.