8
Press UP/DOWN to change the settings. After changing the settings, please press the SET button to
confirm. Otherwise it won’t effect and the system will remain in the precious state.
When you have selected a new channel or frequency and you haven’t pressed SET, the LCD will flash to
remind you. When you press SET, the LCD stops flashing.
Signal Channel solution Menu
Scroll through the menu by using the
SET
button, until the LCD shows:
after 3 seconds the display shows:
Note: Which screen is shown, depends on the previous setup.
When you press UP / DOWN, the LCD indicates 2 modes, either Channel or Frequency. If you select
channel, CHANNL is shown as numerical value. If you select FREQU, it is shown as actual working
frequency. After selecting, you must press SET. Otherwise, your setting is not stored.
After you change and you don’t confirm, the LCD flashes as a reminder. Press SET and the LCD will stop
flashing.
Frequency Set Menu
Scroll through the menu by using the
SET
button, until the LCD shows:
after a second the display shows:
You can now change the frequency with the UP / DOWN buttons (steps of 0.025 Hz to change the
frequency). To confirm you have to press SET. If you don’t press SET, the LCD display will keep flashing.