DAPAudio COM-AR, Manual

Page: 6 / 12

5
COM-ART
Ordercode: D1414
Description of the device
Features
The COM-ART is a PLL UHF wireless audio set. The set consists of one transmitter and one receiver. The
smart and lightweight design enables you to connect the receiver directly to any amplifier or active
speaker. Both the transmitter and receiver can be powered with an AA battery or a USB power supply.
The device operates properly within the range of 50 meters, in an ideal situation. In order to use the
COM-ART for stereo purposes, you will need to purchase 2 sets. The frequency range 606-630 MHz is
divided into 16 frequency presets.
COM-AT (Transmitter)
 Channel: Multi-channel, up to 16 frequency presets per each frequency band
 Frequency band: UHF 606-630 MHz, dependent on applicable country regulations
 Frequency response: 30 Hz - 17 kHz (±3dB)
 Oscillation mode: PLL UHF SYNTHESIZED
 Range: <50 m
 Frequency stability: ±0.005% (-10 ~ 50°C)
 T.H.D.: 1 kHz <0.3%
 Modulation mode: FM (F3E)
 Signal to noise: >98 dB
 Dynamic range: >100 dB
 RF output power: 10 mW
 Max. balance input/deviation: Max. 8 dBu/
±
50 kHz
 Power requirements: AA (LR6) 1,5V
 Power supply: 5V DC (500 mA)
 Dimensions: 114 x 22 x 23 mm (LxWxH)
 Weight: 0,02 kg
COM-AR (Receiver)
 Channel: Multi-channel, up to 16 frequency presets per each frequency band
 Frequency band: UHF 606-630 MHz, dependent on applicable country regulations
 Receiver type: PLL UHF SYNTHESIZED
 Range: <50 m
 Frequency response: 30 Hz – 17 kHz (±3dB)
 Frequency stability: ±0.005% (-10 ~ 50°C)
 T.H.D.: 1 kHz <0.3%
 Modulation mode: FM (F3E)
 Signal to noise: >98 dB
 Dynamic range: >100 dB
 RF sensitivity: -100 dBm/12 dB SINAD
 Max. balance output/deviation: Max. 8 dBu/ ± 50 kHz
 Power requirements: AA (LR6) 1,5V
 Power supply: 5V DC (500 mA)
 Dimensions: 101 x 22 x 23 mm (LxWxH)
 Weight: 0,02 kg