8
COM-ART
Ordercode: D1414
Set Up and Operation
Connection
01)
Connect the COM-AT (transmitter) to your mixer’s main XLR output.
02)
Connect the COM-AR (receiver) to an amplifier/active speaker.
Fig. 04
Note: In order to produce stereo sound, it is necessary to purchase 2 sets of D1414 (see fig. 04).
Power On/Off
01)
The device will switch on automatically, upon receiving power. The display will show the currently
selected frequency preset and will blink 3 times. When no button is pressed for 5 seconds, the display
will turn off.
02)
In order to switch the device off, press and hold down the SET button (07) for 2 seconds.
03)
In order to switch the device on, again press and hold down the SET button (07) for 2 seconds.
Summary of Contents for COM-AR
Page 12: ...2017 DAP Audio...
