10
BP-10 Beltpack for PSS-106
Product code: D2622
4.
Installation
Ambient Conditions
●
The device can be used indoors and outdoors (only if the ambient conditions do not exceed the
conditions described in 2.1. Warnings and Safety Instructions on page 5).
●
The maximum ambient temperature t
a
= 40 °C must never be exceeded.
●
The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
Usage
Use the belt clip (03) on the device to fasten it to your clothes.
Alternatively, wear the device around your waist or arm. To do so, you need to purchase the DAP
Aerobic Belt Bag (D1429) or the DAP Aerobic Arm Bag (D1428).
Installation of the Batteries
The device is delivered without batteries. It accepts 2 x AA LR6 (alkaline) batteries. Rechargeable Ni-Cad
batteries can be used but they do not supply adequate current for more than 4 hours.
To install the batteries:
Press on the sides of the device to open the battery compartment cover (02) (Fig. 05).
Insert 2 x AA LR6 batteries into the battery housing (05) (Fig. 06).
Close the battery compartment cover (02).
Fig. 05
Fig. 06
Note:
Make sure that you install the batteries with correct polarity orientation.
