12
BP-10 Beltpack for PSS-106
Product code: D2622
Connecting to the Receiver
Before use, pair the device and the PSS-106. You need to do this for the system to work properly.
To pair the device with the PSS-106:
Switch the PSS-106 on.
On the PSS-106, choose the desired channel/frequency. Refer to the user manual of the PSS-106 for
more information.
Press on the sides of the device to open the battery compartment cover (02) (Fig. 07).
Fig. 07
Fig. 08
On the PSS-106, press and hold down the UP button for 3 seconds. The channel’s number will start
blinking on the PSS-106’s display.
Put the device’s infra-red (IR) sensor (07) close to the PSS-106’s display to pair both devices. When
the devices are paired, the PSS-106’s display will show the RF range.
Close the battery compartment cover (02).
