9
Maintenance
The DAP Audio Beltpack for COM-51/52 requires almost no maintenance. However, you should keep the
unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not
immerse in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
DAP Audio Beltpack for COM-51/52
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, set the switch on the beltpack in OFF position.
2.
Check the batteries, etc.
3.
If all of the above appears to be O.K., Set the switch in ON position.
4.
If you are unable to determine the cause of the problem, do not open the beltpack, as this may
damage the unit and the warranty will become void.
5.
Return the beltpack to your DAP Audio dealer.
Summary of Contents for Beltpack set for COM-51/52
Page 10: ......
Page 13: ...2014 DapAudio ...
