6
Changing the frequency of the transmitter
1)
Press and hold the
Set (9)
button for 3 seconds. The display shows FREQUE. After a second, the display
shows the actual frequency while the MHz symbol blinks.
2)
Use the
Up (10)
and
Down (11)
buttons to select the desired frequency.
3)
Press the
Set (9)
button again to store the setting. The display will briefly show STORE. Now the setting is
stored in memory.
Locking the transmitter
The beltpack has a locking function. When activated, the locking function blocks all keys so you can’t
accidentally switch the beltpack off or change the frequency while performing.
1)
Press and hold the
Set (9)
button for 3 seconds. The display shows FREQUE.
2)
Tap the
Set (9)
button again, the display will show LOC OFF.
3)
Press the
Up (10)
buttonto turn the lock function on.
4)
Press the
Set (9)
button again. The display will briefly show STORE. Now the setting is
stored in memory.
Unlocking the transmitter
1)
Press and hold the
Set (9)
button for 3 seconds. The display shows FREQUE.
2)
Tap the
Set (5)
button again, the display will show LOC ON.
3)
Press the
Down (12)
button to turn the lock function on.
4)
Press the
Set (9)
button again. The display will briefly show STORE. Now the setting is stored in memory.
Summary of Contents for Beltpack set for COM-51/52
Page 10: ......
Page 13: ...2014 DapAudio ...
