dspblok™ 21469 User Manual
Page 14
Mechanical Dimensions (dspblok 21469)
JH2
60.00[2.36]
55.00[2.17]
Holes 2.3 [0.090] (4 places)
Top Side
Bottom Side
55.00 [2.17]
57.00 [2.24]
60.00 [2.36]
24.00 [0.94]
U7
U6
JH1
Y1
U4
U2
U1
U3
U10
JH2
JH7
JH5
JH4
JH3
JH8
26.00 [1.02]
52.00 [2.05]
28.00 [1.10]
46.00 [1.81]
57.00 [2.25]
44.00 [1.73]
JH6
Mounting holes are equidistant from the center of the dspblok. These holes are 2.3mm in diameter, suitable
for 2-56 or M2 screws. When 4.3mm height mating female connectors are used, the board will be 6.3mm
(0.25 in) above the target board, therefore 0.250 standoffs may be used.
Component height above the board is 6mm (0.236 in). The board is 1.6mm (0.062 in) thick.
