Accessories
Auger extensions with Auger Extension Guards are available in
lengths of 7 and 14 inches for extra hole depth. Make sure your
tractor can accommodate the extra length and still have adequate
clearance. Use
only
factory supplied coiled pins to connect the
auger to the auger extension. Two coiled pins are shipped with
the auger extension, one to install and one spare. When installed,
the coiled pin must be flush with the sides of the auger, and the
area should be covered by the Auger Extension Guard. The auger
retaining bolt should be covered by the Auger Adapter Guard.
AUGER EXTENSIONS
Ref.
Part
No.
Description
No.
1
7" Auger Extension with 2 Special
Coiled Pins & Auger Extension Guard . . .6080G
2
14" Auger Extension with 2 Special
Coiled Pins & Auger Extension Guard . . .6204G
a
Safety Sign . . . . . . . . . . . . . . . . . . . . . . .PHDC5
b
Safety Sign . . . . . . . . . . . . . . . . . . . . . . . . . .2169
c
Decal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6260
d
Decal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6262
AUGER POINTS
Ref.
Part
No.
Description
No.
1
Standard
for augers 6" through 24" diameter . . . . . .831
only
point for 4" augers . . . . . . . . . . . . . . .899
2
Special Duty . . . . . . . . . . . . . . . . . . . . . . . . .1937
3
Aggressive Duty . . . . . . . . . . . . . . . . . . . . . .6210
CUTTING EDGES
Ref.
Part
No.
Description
No.
1
Plain . . . . . . . . . . . . . . . . . . . . . . . . .See page 19
2
Serrated . . . . . . . . . . . . . . . . . . . . . . .See page 19
Cutting edges are available with plain or serrated edges.
See table on page 19 for part numbers.
Plain
Serrated
Standard
Special Duty
Aggressive Duty
1
2
3
Auger points are available in a variety of styles.
See page 21 for Hole Digger Head Point.
1
2
1
2
= Safety Sign Location
c
d
b
c
a
d
b
22
