Dantherm WA 120, Service Manual

Page: 5 / 71

- 4 -
970006_SM_WA 45-300_4.3_EN-TY-FR_20100922.doc
2.1 Installation of the unit
The unit is delivered in upright position on a wooden pallet. The WA 45 – 120 units are delivered in
one complete section each.
The WA 150 - 300 units are delivered in two sections each, a fan section and a burner section. The
burner section is to be placed on top of the fan section. The sections are put together by means of
assembly rails on the outside of the complete frame round the unit.
The heaters 45 – 300 are delivered with lifting brackets, and before lifting or hoisting the heater up
to upright position, the lifting hooks must be mounted to each corner by means of the screws and
pre-bored holes.
Always
use these lifting brackets when lifting or hoisting the
heater.
WA 150 – 300: Assembly of fan section and
burner section