33
How to replace the heating element
Introduction
The complete heating element consists of two identical heating units that are to ensure
that the desired temperature is maintained even if the ambient temperature should fall.
The heating elements are positioned behind the inspection cover at the bottom of the
climate control unit.
When to replace
The heating elements should only be replaced when they are faulty.
Before you start
Before you start, make sure that you have the following with you:
•
A torx 25 screwdriver
•
A small pair of pincers
•
A new heating element (Dantherm spare part number 290550)
•
Type TY125-40-1000 strips (142 x 3.6 mm)
Drawing
The drawing shows the positioning of the heating elements:
Continued overleaf
Heating elements
2.0 • 01.12.2004
910002 • Version
