31
How to replace the control panel
Introduction
The control panel is a PCB fitted with a microprocessor and inputs and outputs for all
the electrical parts of the RBS 800. They control the fan and the damper on the basis of
three temperature sensors.
When to replace
The control panel should only be replaced when it is broken.
Before starting
work
Make sure you have the following before starting work:
•
A torx 20 screwdriver
•
A new control panel (Dantherm spare part number 290520)
Warning!
Switch off the AC and DC supplies to the unit before starting work!
Drawing
This drawing shows where the control panel is located:
Continued overleaf
Control panel
2.0 • 01.12.2004
910002 • Version
