36
3.4 How to install the MTS4 into the outdoor enclosure,
continued
Procedure,
continued
Step
Action
9
…And two M8 at the rear side, which origi-
nally held rear top bracket, are mounted in
their original positions.
All four bolts should now be tightened.
10
Now all standard connections to the MTS
should be made: Ground, AC, DC, Alarm,
E1, GPS, X21, battery temperature sensor
and antenna connections should be made
as in any other standard installation.
11
The battery temperature sensors from the
MTS should be mounted together with the
cables on the teminals of the battery.
(some times only one sensor) The plastic
cover might need modification in order to
be refitted after the temperature sensors
have been fitted. One sensor should be fit-
ted on the “+” terminal and another one on
the “-“ terminal.
12
Now lids and beauty panel should be re-
moved and the special air divider plate
should be mounted.
13
The air divider, which is supplied with the
outdoor enclosure, is mounted as shown in
order to ensure the specified temperature
range, using the original fitted screws.
Continued overleaf