16
2.3 Power distribution panel,
continued
Alarm pin layout
Warning
The cover panel is easily removed by removing
the 4 screws holding it, but be aware of danger
when the cover is removed from the PDP.
Only Authorized personal should remove
the cover and do modification to the PDP.
Dantherm will not take responsibility to any
unauthorized modifications done to the PDP.
The PDP operates with a multiple single
phase system, which means 415VAC live
voltage can be found between live phases.
Operation of Gen-
erator switch (op-
tional)
The generator switch has 3 positions:
1: When turned to the left it selects the
power source connected to left set of
contacts (I) which will be the alternative
power source, normally a diesel genera-
tor connected to the CEEE connector lo-
cated in the plinth of the cabinet.
0: This position (mid picture) will disconnect
External power sources.
2: selector turned right (lower picture).
This is the normal position with mains on.
