Dantherm HPP-iw Series, Owners & Installation Manual, Page: 41 / 308

41 1007332 ISSUE 5
The following exclusions apply to the warranty given
by Dantherm A/S. No claims will be accepted if:
1. The heat pump is installed in any way that is not in
accordance with the current procedures as defined
by Dantherm A/S.
2. The heat pump has been worked upon or is
adjusted by anyone other than a person authorised
to do so by Dantherm A/S.
3. The heat pump is incorrectly sized for the
application.
4. The water flow through the machine is outside the
specified limits.
5. The water pH level and/or chemical balance is
outside the following limits:
6. The heat pump has suffered frost damage.
7. The electrical supply is insufficient or in any way
incorrect.
8. The fan amps and duct pressure are outside the
specified limits.
9. The air flow to and from the machine is outside the
specified limits.
11�0 WARRANTY CONDITIONS
Acidity pH pH 7.2 - 7.8
Total Alkalinity, as CaCO3 ppm 80 - 120
Total Hardness, as CaCO3 ppm 150 - 250
Total Dissolved Solids ppm 1000
Maximum Salt Content ppm 35000
Free Chlorine Range ppm 1 - 2 Domestic
Free Chlorine Range ppm 3 - 6 Commercial
Superchlorination max 30ppm for 24 hrs
Bromine ppm 2 - 5
Baquacil ppm 25 - 50
Ozone ppm 0.9 Max
Maximum Copper Content ppm 1
Aquamatic Ionic Purifier ppm 2 Max