Dantherm HPP-iw Series, Owners & Installation Manual

Page: 31 / 308

31 1007332 ISSUE 5
4�6 OPERATING INSTRUCTIONS
a� Power On & Power Off
Press to power on or power off the heat pump.
b� Temperature Setting
Press
+
- to display and adjust temperature.
c) Mode selection
1. Heating/Cooling/Auto modes
Press to choose heating, cooling and automatic
mode.
In heating mode the
light is on.
In cooling mode the light is on.
In automatic mode the and the lights are
on.
2. Whisper and Boost modes
Press to start Boost mode, and light will turn on.
Press to start Whisper mode, and light will turn
on. (Default mode is Boost).
Please choose Boost mode for initial heating.
c� Defrosting
1. Automatic defrosting
When machine is defrosting, the
lamp flashes;
after defrosting the lamp is illuminated.
2. Forced defrosting
When the heat pump is heating and the compressor
has been working continuously for at least 10 minutes,
press
and
+ -
on the touchscreen controller
simultaneously for 5 seconds to start forced defrosting.
The
lamp flashes and defrost starts,
when the lamp stops flashing defrosting stops.
The interval between forced defrosts must be more
than 30 minutes.