3. INSTALLATION
6
3. Inst all ation
3.1 Introduction
There is one basic model of DanX unit for swimming pool ventilation. Your DanX unit may
differ a little from this. If you are in doubt how to assemble the modules, please ask you
supplier for an exact drawing of the unit.
The units shown in the drawings in this manual are all left hand units, with the outdoor air
coming from the right hand side. If you have a right hand unit all components of the unit are
the other ways around.
Assembly of the DanX modules should only be carried out by trained specialists
or by people
supervised by authorized staff. It is the responsibility of the fitter to read and understand this
guide and other given information.
3.1.1 Unit construction DanX
– XWPRS
The DanX
– XWPRS consist of a cross flow heat exchanger in combination with a compressor
driven heat pump in the same module and a separate mixing box The cooling circuit is
mounted in the XWPRS module, filled with refrigerant and do not need any extra installation.
From left to right the unit consists of the following components/modules:
1)
Heating coil with supply air fan below.
2)
Return air fan and return air filter above.
3)
Cross flow heat exchanger with heat pump.
4)
Mixing box and outdoor filter above.
Summary of Contents for DanX XWPRS Series
Page 1: ...DanX Pool XWPRS User Manual Rev 2 3 066422 en...
Page 34: ......
