HEXFLOW PRODUCT USER MANUAL
2
CONTENTS
INTRODUCTION
This is the service manual for Dantherm
HexFlow heat exchanger units. Please see the
table of contents below for further information
about the sections of this manual.
TARGET GROUP
The target group for this service manual are
the technicians who install and maintain the
HexFlow series units.
COPYRIGHT
Copying of this service manual, or part of it, is
forbidden without prior written permission from
Dantherm Cooling Inc.
RESERVATIONS
Dantherm reserves the right to make changes
and improvements to the product and the
service manual at any time without prior notice
or obligation.
TABLE OF CONTENTS
UNPACKING
|
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
MODEL IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT DRAWINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MOUNTING
|
OPERATION
|
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . 6
CUT OUT
|
MOUNTING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
DESIGN DATA: GENERAL PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . 10
WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
RETERN MATERIAL AUTHORIZATION PROCEDURE. . . . . . . . . . . . . . 14