P
AGE
52
46020-38-0299 <90-00029>
E
CHO
Purpose:
Reports the MAP CPM Echo switch (S2-6) as on or off.
Format:
ECHO
I
NTERPOLL
D
ELAY
Purpose:
To modify the timeout between responses when the MAP is
polling DCM devices.
Format:
IPD
IPD [delay time]
Remarks:
The command IPD shows the current delay time setting.
The default setting for the time delay is zero. This means that
the interpoll delay is not used.
To enter a delay time, type a number between 128 and 255. A
delay of 128 equals 500 milliseconds. A delay of 255 equals one
second.
Once a delay time is set, you cannot reset the delay to zero. To
return the delay time to zero, follow the steps below.
♦
Turn off power to the MAP.
♦
On the MAP, place switch S5-7 UP.
♦
Install the MAP in the shelf.
♦
Apply power for ten seconds. This erases the configuration
and resets the interpoll time delay to zero.
♦
Remove the MAP and place switch S5-7 DOWN.
♦
Install the MAP in the shelf.
♦
Turn on the power.
PRINTER SYNTAX
C
AUTION
:
This procedure will erase the
configuration in the memory of
the MAP.
