11
11
11
11
Note
User will see numeric pad to select “Preset” number, once after user set a PTZ protocol
in setting menu.
Maximum Preset number is 255 but it can be restricted by the number that PTZ camera
supports.
User can automatically switch PTZ camera position according to the sequence of preset setting
by using GUARD TOUR function, though the connected PTZ camera does not support it.
“GUARD TOUR” on the pop-up menu can be enabled after changing to full screen for the
channel that the PTZ camera is connected to. Please make sure that PTZ camera setting is
correct, otherwise, “GUARD TOUR” is shown as disabled.
Caution
Depending on PTZ camera, some preset positions might be skipped in the case that
the PTZ camera cannot mechanically move or control focus within the interval time
set by DVR. In this case, it is recommended to make setting of interval time a little
longer.
Summary of Contents for DLW5400
Page 3: ......