16
3.2
Presets title edit operation
After User enters the edit state, the screen will
show as the picture
：
User may see that the current setup is No.1
pre-setting point, with the title “NO TITLE”. Use
PAN LEFT/RIGHT to move cursor, TILT UP/DOWN to amend the number. Push
CLOSE key-press to leave the edit state and save the amendment. The title may
at most contain 8 letters, which could be 0
～
9.A
～
Z.+.- and blank.
3.Protocol and Address Setting
Interface standard RS422, built-in with many communication Protocol, Baud rate:
2400bps~19200bps. Make sure communication protocol in controlling keyboard
and computer should be compliance with night vision
camera.
Please note Pelco D uses 2400 BAUD RATE
1. Address Setting
：
this step request bottom plate be
open, and code switch of inner circuit should be as
right image (J1):
PRESET
：
：
：
：
NO. 001
TITLE
：
：
：
：
NO TITLE
CLOSE
：
：
：
：
EXIT
