MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
EXIT
OLD PASSWORD:******
NEW PASSWORD:******
CONF PASSWORD:******
BACK
EXIT
ENABLE PASSWORD OFF
PASSWORD SETTING
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETTING
CLOCK SETTING
COMM SETTING
BACK
EXIT
Password setting is the built-in function of high speed dome. Setting password
(6 figures) is very useful to protect the dome setting. If you do not have password,
you can't enter the setting menu. The initial password of the dome is "000000".
1. The system enters into the main menu by calling 95 preset or by calling 9 preset
twice within 3 seconds.
2.
SYSTEM SETTING
,
to call the submenu.
3.
PASSWORD SETTING
,
OPEN
to call System motion controlling menu, as the left picture shows.
4. Input old password: Operate joystick, move the cursor to
OLD PASSWORD
,
press
OPEN
, there will be a sign
to display in the front of
OLD
PASSWORD
, the cursor jumps to the first character on the right, move joystick
up and down to set the first password, its option rage is 0-9, by tilting left and right
the joystick to input the other bits, press
OPEN
to save.
5. Input new password: Operate joystick, move the cursor to
NEW PASSWORD
,
press
OPEN
, there will be a sign
to display in the front of
NEW
PASSWORD
, the cursor jumps to the first character on the right, according to
the above instruction user can ordinally input the password by moving up/down
joystick, press
OPEN
to over.
6. Confirm the new password: Input the user's needful password again according to
above method. Failing to modify the password if this password is different with the
fifth step.
7. Start password or not: operate joystick, move cursor to
ENABLE PASSWORD
,
press
OPEN
, and move joystick up and down, then it will switch between
ON/OFF. When choose
ON
, the setting of password is valid, when
OFF
,
the setting of password is invalid.
Operate joystick and move the cursor to
Operate joystick and move the cursor to
press
OPEN
press
5. 7 Password Setting
16
System setting
While user forgot password, and can't enter into main menu,
user can use super password, PTZ's password will be changed
as initial one, at this time User need to reset the password.
PTZ's initial password is 000000, Super password is 892226
NOTICE