DJ Series of Rolling Jacks
9
P/N 5900258 — Rev. A — October 2020
Setup
This section describes how to set up your Dannmar Rolling Jack.
Safety Rules
When installing a Rolling Jack, your safety depends on proper training and thoughtful operation.
⚠
WARNING
Do not install this equipment unless you have automotive lift installation training.
Always use proper lifting tools, such as a Forklift or Shop Crane, to lift heavy
components. Do not install this equipment without reading and understanding this
manual and the safety labels on the unit.
Only fully trained personnel should be involved in installing this equipment. Pay attention at all times.
Use appropriate tools and lifting equipment. Stay clear of moving parts.
⚠
WARNING
You
must
wear OSHA-approved (publication 3151) personal protective equipment
at all times when installing, using, maintaining, or repairing the Rolling Jack: leather
gloves, steel-toed work boots, eye protection, back belts, and hearing protection
are
mandatory
.
Tools
You may need some or all of the following tools:
•
Hex key wrench set
•
Medium crescent wrench
•
Forklift, Shop Crane, or other heavy lifting device
•
Medium flat screwdriver
•
Tape measure, 25 feet or longer
•
Air fitting, to connect the Air-Operated Hydraulic Pump to air pressure
Unloading and Unpacking
After your Rolling Jack arrives, carefully remove the Rolling Jack from the shipping container and verify
that you have all the necessary parts.
⚠
CAUTION
Use caution when taking the Lift out of it shipping container. You do not want to
damage the unit, misplace the components, or get hurt.
The shipping container includes the Rolling Jack with Air-Operated Hydraulic Pump, Accessory Box,
four Safety Brackets, and two Roller Assemblies.
If any of these items are missing, contact your dealer, go to
, or call
1
(877) 432–6627.
Summary of Contents for DJ Series
