DSLP48 User's manual -
Page 8 of 27
6.0
Unlocking the Device
The first thing you will need to do is to make sure your DSLP48 is unlocked.
If the unit is locked you can see all functions but cannot make any changes
via the front panel nor computer interface.
1: Press the Upper Left MENU key (on the control button on the right side
of the unit) and while holding down-press one of the output Mute buttons,
Release. This should bring up a screen with a Level control on it. Turn the
data wheel and see if this level changes. If it does your DSP is unlocked. If
it does not, follow the next steps.
2: If your unit is locked-proceed with the following. On the front of the
DSP locate the control buttons towards the right side. Press the HOME
button, then the ENTER button. This will get you back to the start screens.
Press the Upper Right MENU button repeatedly until you get to the OLD
PASSWORD screen. Then press one the same button one more time. This
will get you to the SYSTEM PASSWORD screen.
Now press ENTER- TWICE. This should unlock your DSP. Try step 1 above
to see if the unit is unlocked.
You will need to unlock the DSP in this manner whether you are using the
computer interface or front panel access.
See ALSO the section on
Security/Passwords
(page 15) for more
information.
