DSLP48 User's manual -
Page 10 of 27
(Input Menus continued)
FREQ
- EQ center frequency. Ranges from 20 to 20,000Hz in either 1Hz
steps or 1/36 octave steps. The sampling rate and the frequency steps can
be selected in the
System Menu
.
BW
- EQ Bandwidth. Ranges from 0.02 to 2.50 octaves in steps of 0.01
octave steps for PEQ. The Q value is automatically shown beneath the
octave value. For Lo-Slf or Hi-Shf, it is either
6 or 12dB/Oct.
I1: XXXXXX EQ
BW: 0.33 Q=4.36
Type
- Type of EQ. The types can be parametric (PEQ), Lo-shelf (Lo-shf) and
Hi-shelf (Hi-shf), AP (All Pass).
GEQ
This is a standard 1/3
rd
octave graphic EQ on ISO centers (you cannot adjust
the freq), but only the boost/cut.
XOVER
This allows for both high and low CUT filters of L/R, Bessel or Butterworth
types and 6-48dB/oct slope rates.
COMP
This is a compressor that allows for THRESHOLD, ATTACK, RELEASE (as a
ratio of input time), RATIO,
Ch-Name
- Channel Name
Name - Channel name. It is 6 characters in length.
Use the cursor keys and the data wheel to enter the name