DSLP48 User's manual -
Page 12 of 27
(Output Menus continued)
Filter
Low crossover
High crossover
Configuration
point
point
None FTRL
Off
FTRH Off
Highpass
FTRL not Off
FTRH Off
FRQL
Lowpass
FTRL Off
FTRH not Off
FRQH
Bandpass
FTRL not Off
FTRH not Off
FRQL FRQH
Limit
- Output Limiter
THRESH - Limit Threshold. Ranges from -20 to +20dBu in 0.5dB steps.
The Threshold adjusts the output LEVEL meter to read the onset of
limiting-NOT output clipping.
ATTACK - Attack time. Ranges from 0.3 to 1ms in 0.1ms steps, then
ranges from 1 to 100ms in 1ms steps.
RELEASE - Release time. Can be set at 2X, 4X, 8X, 16X or 32X the
attack time.
Source
- Input Source
1,2,3,4 Input channel source for the current output channel. Can be
set to enable the input source (On) or disable it (Off). If more than
one input source are enabled, they will be added together as the
source for the current output channel. The numbers indicate the
gain of a particular input routed to that particular output.
O1:XXXXXX Source
In1:0.00
O1:XXXXXX Source
In2:-10
O1:XXXXXX Source
In3:Off
O1:XXXXXX Source
In4:2.5
Ch-Name
- Channel Name
Refer to the Input Menus for details
